Planet ICA-3480F User Manual page 37

Steps 2: Click "□" to enable PPPoE, input the device dynamic IP, user name, and
password of the PPPoE.
Steps 3: Click "Apply" to save the configuration.
【PPPoE】Turn on/off the device PPPoE function.
【User Name】The PPPoE user name provided by the ISP (Internet Service Provider).
【Password】The password corresponding to the user name.

After completing the setting, the device will automatically dial after restarting.
After successful dialing, the network information can be displayed in the
network status, and users can access the device through the IP address.
④ FTP
Set the FTP (File Transfer Protocol) server and you can store the alarm icon to the FTP server.
Precondition
You need to purchase or download the FTP service tool and install the software on your PC.

To create an FTP user, you need to set the FTP folder write permission;
otherwise the image will not be uploaded successfully.
The steps to configure FTP are as follows:
Step 1: In the main interface, click "Config  Network  Basic Setup  FTP" to enter the FTP
server settings interface, as shown in Figure 6-6 ⑤.
User's Manual of ICA-3480F/ICA-4480F
Figure 6-6 ④
37