Table of Contents
Advertisement
User's Manual of ICA-3480F/ICA-4480F
【Video/Audio DSCP】 You can input the value manually to set the "Video/Audio DSCP".
These values will be set according to the actual environment. The scope of valid values is from
0 to 63, and the default value is 0.
【Alarm DSCP】 You can input the value manually to set the "Alarm DSCP". These values will
be set according to the actual environment. The scope of valid values is from 0 to 63, and the
default value is 0.
【Management DSCP】 You can input the value manually to set the "Management DSCP".
These values will be set according to the actual environment. The scope of valid values is from
0 to 63, and the default value is 0.
⑦ 802.1X
In the main interface, click "Config Network Basic Setup 802.1X" to enter the 802.1X
interface, as shown in Figure 6-6 ⑧.
6-6 ⑧
The steps to configure FTP are as follows:
Step 1: Click "
" to enable IEEE 802.1X, and choose "Agreement Type" in "EAP-MD5" or
"EAP-LEAP".
Step 2: Select EAPOL Version in 1 or 2.
Step 3: Configure User Name, Password, and Confirm Password.
Step 4: Click "Apply" to save the configuration.
40
Advertisement
Table of Contents
