Dealer Pre-Delivery Checklist - H&S HI-DUMP 9215 Operator's Manual

DEALER PRE-DELIVERY CHECKLIST

AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the HI-DUMP has been completely set up, check to be certain it is in correct operating order
before delivering to the customer. The following is a list of points to inspect. Check off each item as
you have made the proper adjustments and found the item operating satisfactorily.

HI-DUMP was not damaged in shipment. Check for dents and loose or missing
parts. Report damage immediately to H&S Manufacturing Co., Inc.

HI-DUMP has been correctly assembled according to the Dealer Set-up
Instructions and/ or the Set-up & Assembly Instructions in this manual.

Wheel nuts are torqued to listed specification and all other fasteners are
tightly secured.

All bolts and fasteners are tight.

All shields and guards are in place and fastened.

All grease fittings have been lubricated.

Hoses and fittings are properly attached and there are no visible leaks.

All cylinder/mechanisms are operating trouble free.

Decals are in place and legible.

For proper weight ballast, a tractor weight kit & weights, or solution in excess of
1,600 lbs has been added to the tire opposite the dump side.
Model Number ______________________________________________
Serial Number ______________________________________________
Dealer's Name _________________________________________________________________
Inspection Date _____________________________________________
Signature of Pre-Delivery Inspector _________________________________________________