BMW X7 2023 Owner's Manual page 91

Functional requirement
The driver has registered in the vehicle with a
BMW ID.
Activating the valet parking mode
1. Apps menu
2. "Vehicle apps"
3. "System settings"
4. "Valet parking mode"
5. If necessary, "PIN"
If the active BMW ID does not have an as-
signed PIN, this PIN must be set now. The
PIN is needed to deactivate the valet park-
ing mode.
6. If necessary, enter the PIN.
7. "Activate valet parking mode"
Deactivating valet parking mode
1. Select the desired BMW ID on the lock
screen.
2. ▷
Enter the assigned PIN for the BMW ID.
If you have forgotten the PIN: enter the
access data for the BMW ID.
▷ If the selected BMW ID does not have
an assigned PIN: enter the access data
for the BMW ID.
Settings
General information
Depending on the equipment and national-
market version, various settings for opening
and closing are possible.
Unlocking and locking
Doors
1. Apps menu
2. "Vehicle apps"
Opening and closing
Online Edition for Part no. 01405A7B198 - II/23
3. "Doors and windows"
4. "Lock/unlock"
5. "Unlock"
6. Select the desired setting:
▷ "Driver's door only"
Only the driver's door and the fuel filler
flap are unlocked. Pressing again un-
locks the entire vehicle.
▷ "All doors"
The entire vehicle is unlocked.
Touchless unlocking/locking
1. Apps menu
2. "Vehicle apps"
3. "Doors and windows"
4. "Comfort access"
5. Select the desired setting.
Automatic unlocking
1. Apps menu
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. Select the desired setting:
▷ "Unlock doors at end of trip"
▷ "Unlock doors when in P"
After drive-ready state is switched off, the
locked vehicle is unlocked automatically by
pressing the start/stop button or engaging se-
lector lever position P.
Automatic locking
1. Apps menu
2. "Vehicle apps"
3. "Doors and windows"
4. "Lock/unlock"
5. "Lock after a short time"
CONTROLS
91