BMW X7 2023 Owner's Manual page 221

The indicator lights in the instrument cluster
illuminate and the mark on the speedometer is
set to the current speed.
The driving mode changes or Dynamic Sta-
bility Control activates when cruise control is
switched on.
Turning the speed control system
off/interrupting
The speed control system can be turned off or
canceled automatically or manually.
Additional information:
Speed control systems, refer to page 217.
Adjusting the speed
Store/maintain speed
Press the rocker switch up or down
once while the system is interrupted.
When the system is switched on, the current
speed is maintained and stored as the set
speed.
The stored speed is displayed on the speed-
ometer.
When the Speed Limit Assistant is not active,
the current speed can also be stored by press-
ing a button:
Press the button.
Changing the speed
Repeatedly press the rocker switch up
or down until the desired speed is set.
If active, the displayed speed is stored
and the vehicle reaches the stored speed
when the road is clear.
The maximum speed that can be set depends
on the vehicle.
Driver assistance systems
Online Edition for Part no. 01405A7B198 - II/23
Press the rocker switch to the resistance point
and hold it: vehicle accelerates or decelerates
without pressing the accelerator pedal.
After the rocker switch is released, the vehicle
maintains its final speed. Pressing the switch
beyond the resistance point causes the vehicle
to accelerate more rapidly.
Continuing cruise control
At the stored speed
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large be-
fore calling up the stored speed. Otherwise,
unwanted vehicle deceleration or acceleration
may occur.
Press the button with the system inter-
rupted.
Cruise control is continued with the stored val-
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
At the current speed
Press the button to continue Cruise
Control at the current speed.
Speed Limit Assistant: at the
suggested speed
When a speed is suggested, press the
button to accept the Cruise Control at
the suggested speed.
CONTROLS
221