BMW X7 2023 Owner's Manual page 316

CONTROLS
Removing the cargo cover
Pull the cargo cover out toward the rear, arrow.
Stowing the cargo cover
1. Remove the side cover on the left or right.
Side covers, refer to page 311.
2. Fold up the cargo area floor.
3. Fold the rear part of the cargo cover for-
ward.
4. Turn the cargo cover and stow it in the re-
cess.
5. Close the cargo floor panel completely.
6. Close the side cover.
Cargo area partition net
General information
The cargo area partition net can be installed in
two different positions in the vehicle.
316
Cargo area
Online Edition for Part no. 01405A7B198 - II/23
With the rear seat backrest folded
down
When the rear seat backrest is folded down,
install the cargo area partition net behind the
front seats.
1. Fold down the rear seat backrests.
Enlarging the cargo area, refer to page 311.
2. Open the front cover caps up on the roof
frame until they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recep-
tacles until they reach the stop, arrow 1, and
push them forward.
4. Hook the cargo area partition net with the
lower two hooks onto the two loops on the
folded-down rear seat backrest, arrow 2.
You may need to lift the rear seat backrests
slightly in order to do this.