BMW X7 2023 Owner's Manual page 317

With the rear seat backrest upright
When the rear seat backrest is upright, install
the cargo area partition net behind the 2nd row
of seats.
1. Remove the cargo cover.
2. Open the rear cover caps up on the roof
frame until they engage.
3. Insert each of the two top retaining pins of
the cargo area partition net into the recep-
tacles until they reach the stop, arrow 1, and
push them forward.
4. Hook the cargo area partition net with the
lower two hooks into the two loops on the
rear seat backrest, arrows 2.
5. Tighten the cargo area partition net with
the two belt adjusters.
Stowing the partition net
The cargo area partition net can be stowed
under the cargo floor panel.
1. Remove the cargo area partition net.
2. Roll up the cargo area partition net and
pack it with the hook and loop tape.
Online Edition for Part no. 01405A7B198 - II/23
Cargo area
3. Fold up the cargo area floor.
4. Stow the cargo area partition net in the re-
cess.
5. Push the cargo floor panel downward.
CONTROLS
317