BMW X7 2023 Owner's Manual page 194

CONTROLS
General information
Radar sensors monitor the area behind and
next to the vehicle when traveling faster than a
minimum speed.
The minimum speed is country-specific and
displayed in the Active Blind Spot Detection
menu.
The system indicates whether there are vehi-
cles in your blind spot, arrow 1, or approaching
from behind in an adjacent lane, arrow 2. The
warning light in the exterior mirror illuminates
dimly.
The system will warn in the previously named
situations prior to a lane change. The warn-
ing light in the exterior mirror flashes and the
steering wheel vibrates.
When turning at a speed of up to approx.
12 mph/20 km/h, the steering wheel will not
vibrate.
Safety information
Follow the safety information in the "Forward
Collision Mitigation" chapter.
Sensors
The system is controlled by the following sen-
sors:
▷ Camera behind the windshield.
▷ Radar sensors, side, rear.
▷ Depending on the equipment: radar sen-
sors, side, front.
194
Safety
Online Edition for Part no. 01405A7B198 - II/23
Functional requirement
The areas of the sensors must be clean and
clear.
Turning Active Blind Spot Detection
on/off
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Adjusting the Active Blind Spot
Detection
Setting the warning time
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Safety and warnings"
6. "Active Blind Spot Detection"
7. Select the desired setting.
Setting the intensity of the steering
wheel vibration
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
The setting is applied to all collision warning
systems.