BMW X7 2023 Owner's Manual page 219

▷ While Dynamic Traction Control is acti-
vated.
▷ When braking manually.
Interrupting speed control systems
manually
Press the button.
Continuing speed control systems
Press the button.
Turning off speed control systems
automatically
The speed control systems turn off automati-
cally when the drive-ready state is turned off.
Turning off speed control systems
manually
Press the button.
The speed control systems are turned
off and the displays extinguish.
Adjusting speed values
Repeatedly press the rocker switch on
the steering wheel up or down until the
desired value is set.
▷ Each time the rocker switch is tapped to the
resistance point, the set speed increases or
decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the resistance point, the desired speed
changes by a maximum of 5 mph/10 km/h.
Driver assistance systems
Online Edition for Part no. 01405A7B198 - II/23
Display in the instrument cluster
Display in the speedometer
A mark is displayed on the
speedometer for the set speed.
▷ Green marking: system is ac-
tive.
▷ Gray marking: system is in-
terrupted.
▷ No marking: system is switched off.
Notifications
In addition to the respective check lamps, noti-
fications are displayed for some functions.
The scope of notifications can be set.
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Driving"
6. "Notifications"
7. Select the desired setting.
Cruise Control
Principle
With the Cruise Control, a set speed can be ad-
justed using the buttons on the steering wheel.
The system maintains the set speed. The sys-
tem accelerates and brakes automatically as
needed.
General information
The system can be activated starting at
20 mph/30 km/h.
Depending on the vehicle setting, the Cruise
Control settings can change under certain
conditions. For instance, the acceleration can
change depending on the driving mode.
CONTROLS
219