BMW X7 2023 Owner's Manual page 283

Setting the rear automatic climate
control temperature
Via iDrive
1. "CLIMATE MENU"
2. "Settings"
3. "Second row of seats"
4. Set the desired temperature.
Using the button
Press the upper or lower button side to
set the desired temperature.
Upper body temperature
General information
The air temperature in the upper body area
can be adjusted.
This does not change the set interior tempera-
ture for the driver and front passenger.
Adjusting the upper body temperature
1. "CLIMATE MENU"
2. "Settings"
3. "Driver" or "Front passenger"
4. "Temp. adjustment upper body"
5. Increase or decrease temperature.
Air conditioning
Principle
The air in the interior will be cooled and dehu-
midified and, depending on the temperature
setting, warmed again.
Functional requirement
Standby or drive-ready state is switched on.
Online Edition for Part no. 01405A7B198 - II/23
Climate control
Switching the cooling function on/off
1. "CLIMATE MENU"
2. "A/C"
Depending on the weather, the windshield and
the side windows may fog up briefly when
drive-ready state is switched on.
When using the cooling mode, condensation
that will exit below the vehicle.
Maximum cooling
Principle
The function enables a quick and intense cool-
ing of the interior.
General information
The system is set to the lowest temperature
and maximum air volume.
The function is automatically activated in the
rear when the SYNC program is turned on.
Functional requirement
The function is available at an outside temper-
ature above approx. 32 ℉/0 ℃ and with the
drive-ready state switched on.
Turning maximum cooling on/off
1. "CLIMATE MENU"
2. "MAX A/C"
Air flows out of the air vents to the upper body
area. Open the vents.
Rear automatic climate control:
Press the button.
The button LED illuminates when max-
imum cooling is turned on.
CONTROLS
283