BMW X7 2023 Owner's Manual page 314

CONTROLS
Warning
A cargo cover that snaps back quickly can
jam body parts or cause damage. There is a
risk of injury or risk of damage to property. Do
not let the cargo cover snap back into place.
Warning
An incorrectly inserted cargo cover can be
thrown about the car's interior, such as in the
event of an accident or a braking or evasive
maneuver. There is a risk of injury and risk
of damage to property. Make sure the cargo
cover is securely engaged in the brackets.
Roller cover for the luggage
compartment behind the second
row of seats
Remove from the storage under the
cargo floor panel
1. Remove side covers.
Side covers, refer to page 311.
2. Fold up the cargo area floor.
3. Raise the roller cover for the luggage com-
partment slightly.
4. Slide the roller cover for the luggage com-
partment as far to the right as possible.
5. Raise the left roller cover for the luggage
compartment and guide it past the trim
panel.
Inserting the roller cover for luggage
compartment
1. Fold the rear seat backrest of the third row
of seats forward.
Fold the rear seat backrest forward, refer to
page 112.
2. If necessary, remove the cargo cover be-
hind the third row of seats.
314
Cargo area
Online Edition for Part no. 01405A7B198 - II/23
3. Closing the lower tailgate.
4. Remove covers from brackets.
5. Remove the roller cover for the luggage
compartment from the recess under the
cargo floor panel.
6. Insert the roller cover for the luggage com-
partment into the brackets from the top, ar-
rows.
Make sure that the roller cover for the lug-
gage compartment is positioned correctly in
the brackets and that the clasps click into
the locked position.
The roller cover for the luggage compartment
was inserted correctly when a green color cod-
ing is visible on the release buttons. If a green
color coding is not visible, proceed as follows:
▷ Remove the roller cover for the luggage
compartment and insert it again.
▷ Push the release button back until the
green color coding is visible.