BMW X7 2023 Owner's Manual page 231

The steering wheel displays can be turned on/
off.
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Light elements"
7. Select the desired setting.
Displays in the Head-up display
Depending on the equipment, the system in-
formation can also be displayed in the Head-
up display.
Setting the intensity of the steering
wheel vibration
1. Apps menu
2. "Vehicle apps"
3. "Driving settings"
4. "Driver Assistance"
5. "Feedback via steering wheel"
6. "Vibration intensity"
7. Select the desired setting.
This setting is applied to all collision warning
systems.
System limits
General information
The system cannot be activated or meaning-
fully used in certain situations.
Safety information
Warning
Due to its limits, the system may not react, or
it may react too late or in a manner that is not
consistent with normal use. There may be a
risk of accidents or risk of damage to prop-
Driver assistance systems
Online Edition for Part no. 01405A7B198 - II/23
erty. Actively intervene as warranted. Refer
to the information in this Owner's Manual re-
garding the scope of the system's operation
and limitations.
The Cruise Control and Distance Control alerts
also apply.
Additional information:
▷ Cruise control, refer to page 219.
▷ Distance control, refer to page 222.
System limits of the sensors
Additional information:
▷ Cameras, refer to page 35.
▷ Radar sensors, refer to page 36.
Hands on the steering wheel
The sensors cannot detect hand-steering
wheel contact in the following situations:
▷ Driving with gloves.
▷ Protective covers on the steering wheel.
Weather
The following restrictions can occur under un-
favorable weather or light conditions:
▷ Poorer recognition of vehicles and lane
boundaries.
▷ Short-term interruptions in case of already
detected vehicles and lane boundaries.
Drive attentively, and react to the current sur-
rounding traffic situation. If necessary, inter-
vene actively, for instance by braking, steering
or evading.
CONTROLS
231