Table of Contents
Advertisement
2.8. Special Programming
35
When PRG is selected, the display will show:
This option allows you to select a number of special programming features for INPUT or OUTPUT. INPUT is
provided with FILTER, DECIMAL and PROBE options. OUTPUT is provided with STEP and RAMP options.
2.8.1. FILTER Programming
The value of this parameter (in seconds) supplies the time constant of a first order digital filter attached to
the selected input. When filtering the measured signal is not required, you should simply set this parameter to zero.
Note: For the frequency input the filter has no effect.
2.8.2. DECIMAL Programming
The value of this parameter (0, 1, 2, 3 or DEFAULT) indicates the number of decimals with which the value
measured at the input will be shown in the display.
Note: DEFAULT corresponds to the maximum number of decimals that may display in an input
measurement, in compliance with its resolution.
INPUT
OUTPUT
Advertisement
Table of Contents
