Presys MCS-12-IS Technical Manual page 2

• This manual contains instructions for the MCS-12-IS (in the rest of the manual called by calibrator)
designed for use in hazardous areas. Read the entire manual before using the calibrator.
Before using the calibrator, carefully read the section "Special conditions for safe use".
•
• Keep the calibrator in a dry environment whenever possible.
In case of failure or suspected failure, especially in safe operation, send the instrument for repair to the
•
factory., always send the instrument to the factory for repair.
• When not in daily use, before starting up, let the calibrator be turned on for at least one hour.
EM0414-01 (09/20/2021) - Translated version of the document EM0370-01
IMPORTANT INSTRUCTIONS:
The warranty conditions are available on our website:
www.presys.com.br/warranty