Table of Contents
Advertisement
DATE updates the internal date and time of the calibrator. Thus, when it performs a calibration previously
programmed by the software ISOPLAN, calibration data is recorded together with their date and time of occurrence.
19
Whenever the calibrator is turned off, these data are not updated any longer. Thus, if you want the date and time to
be recorded together with the calibration, one should update these data either by means of the keyboard or
automatically via the software ISOPLAN. For such, use the vertical arrow keys and to change the value which is
blinking and the horizontal arrow keys and ➔ to go to another value. The ENTER key confirms the last selection.
BAT shows the value of the battery voltage
LCD performs the setting of the display contrast by means of arrow keys and . Save the last selection
by pressing the ENTER key.
PRG, FN and MEM are calibrator special resources described further on.
Battery level
7.2 to 9.0 V
< 7.2 V
Battery state
normal
low
Display
________
LOW BAT
Advertisement
Table of Contents
