Table of Contents
Advertisement
After the self-test is completed, the display shows the starting menu:
18
IN / OUT - Selects the input/output functions
ADJ - Selects functions which adjust the calibrator itself (see chapter Adjustment).
Do not enter in ADJ option before reading the warning in section 4 - Adjustment.
COM - Refers to the communication with the computer, described in an appropriate manual.
EXEC - Used to activate an input or output option which has been previously selected.
CONF -
CF changes both the input and output temperature units from °C to °F and vice-versa. It also enables to
choose the temperature scale between IPTS-68 and ITS-90. It follows the encoding scheme described below:
C-90
F-68
IN
CONF
Takes to the sub-menu:
CF
FN
ITS-90 temperature scale in Celsius degrees.
IPTS-68 temperature scale in Fahrenheit degrees.
OUT
EXEC
ADJ
COM
PRG
MEM
DATE
BAT
LCD
P
Advertisement
Table of Contents
