Figure 2: Binary Programming Script - iWave iW-RainboW-G17D User Manual

iW
iW-RainboW-G17D Linux User Guide

The programming script will be in below path of the deliverables.
<path to iW-RainboW-G17M-Q7-Rx.x-RELx.x-LinuxDeliverables>/iW-RainboW-G17M-Q7-
Rx.x-RELx.x-LinuxDeliverables/Tools/ProgrammingScript/mksdboot_iwg17m.sh

Copy the programming script file into local directory and change the permission.
host@host~$

Execute the below command to program the binaries into SD card.
host@host~$

Enter the path for the binaries on the prompt

After entering the path for all the binaries, the terminal will prompt a warning.
iWave Systems Technologies Pvt. Ltd.
chmod +x mksdboot_iwg17m.sh
sudo ./mksdboot_iwg17m.sh –device /dev/sdc –sdk tmp

Figure 2: Binary Programming script

Rev 1.0
Page 16 of 55