CyberData 011186 Configuration Manual page 19

9. Set the 'SIP Transport Protocol' to TLS.
10. Keep TLS version set to "1.2 Only (Recommended)".
11. Check the box for "Verify Server Certificate".
12. Set the Primary SIP Server to the SIP Domain from the configuration Popup.
13. Set the Primary SIP User ID to the Username from the configuration Popup.
14. Set the Primary SIP Auth ID to the Authorization ID from the configuration Popup.
15. Set the Primary SIP Auth Password to the password provided in the configuration
Popup.
16. Set the Outbound proxy and Outbound Proxy port to the address provided in the
configuration Popup.
Note: Make sure to separate the port from the outbound proxy information provided by zoom.
17. Check the box for "Force Selected Codec".
18. Save.
19. Go to the 'SSL' Tab.
Figure 5-4: SIP Tab
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: INTERCOMS
Doc. 931706B Page 18