CyberData 011186 Configuration Manual page 12

ZOOM CONFIGURATION GUIDE: INTERCOMS
Doc. 931706B Page 11
4. After clicking the Add button a Pop-up will appear that allows extension creation.
Figure 4-5: Add Phone Pop-up
5. Set the Extension Number or User the intercom is associated to.
6. Set the Display Name to the location of the intercom.
7. Set the MAC address of the device.
Note: Adding the MAC Address will switch the device type to "Algo/CyberData" make sure
Paging&Intercom is set for the model.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193