Power Off Timer - Olivetti d-COPIA 1801 MF Operation Manual

Installing and Setting up the Machine > Setting Energy Saver Function
2

Power Off Timer

If the machine is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to set the
time until the power turns off. The factory setting for the time until the power turns off is 1 hour.
To change the preset power off time, refer to
To use the Power Off Timer, configure the following settings:
• Power Off Rule (page 2-23)
• Power Off Timer (page 2-24)
Power Off Rule
Follow the steps below to set whether the power automatically turns off when not used.
1
3
Press the [▲] or [▼] key to select [Timer Settings], and press the [OK] key.
Common Settings
Timer Settings
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page
The factory default login user name and login password are set as shown below.
Login User Name
*1
Admin
*1 Upper case and lower case letters are distinguished (case sensitive).
4
Press the [▲] or [▼] key to select [Sleep Timer], and press the [OK] key.
Timer Settings
Sleep Timer
Set the sleep time.
Use the numeric key or press the [▲] or [▼] key to enter the sleep time, and press the [OK]
key.
Sleep Timer
(1 - 60) 60 min.
Power Off Rule on page 7-12
Display the screen.
1
Press the [Status/System
1
2-20.
Admin
1
1 2
and Power Off Timer on page
Menu/Counter] key.
2-23
2
Login Password
*1
2
7-12.