Olivetti d-COPIA 1801 MF Operation Manual page 96

Operation on the Machine > Copying
Two-sided to Two-sided
Original
Book to One-sided
Original
Book to Two-sided
Original
Prints 1-sided or open book originals to 2-sided, or 2-sided or open book originals to 1-sided. Select the binding
orientation for original and finished documents.
Item
1-sided>>1-sided
1-sided>>2-sided
2-sided>>1-sided
2-sided>>2-sided
Book>>1-sided
Book>>2-sided
Produces two-sided copies from two-sided originals. The optional duplex unit
and document processor are required.
NOTE
The paper sizes supported in Two-sided to Two-sided mode are A3, B4,
Copy
A4, A4-R, B5, B5-R, A5-R, Ledger, Legal, Letter, Letter-R, Executive,
Statement-R, Oficio II, 216 × 340 mm and Folio.
Produces a 1-sided copy of a 2-sided or open book original.
The following binding options are available.
Binding Left: Originals with facing pages are copied from left to right.
Copy
Binding Right: Originals with facing pages are copied from right to left.
NOTE
• The original sizes supported in Book to One-sided mode are Ledger,
Letter-R, A3, A4-R, A5-R, B4, B5-R and 8K.
• The supported paper sizes are A4, B5, Letter and 16K. You may change
paper size and reduce or enlarge copy to match that size.
Produces two-sided copies from an open book original with facing pages.
The optional duplex unit is required.
NOTE
• The original sizes supported in Book to Two-sided mode are A3, B4,
A4-R, B5-R, A5-R, Ledger, Letter-R and 8K.
Copy
• The supported paper sizes are A4, B5 and Letter.
Value
―
―
Disables the function.
Copies the original with the default setting. For the default
settings, refer to Function Default on page
5-15
Description
7-13.