Job Accounting > Setting an Account
Editing an Account
This changes the registered account information.
1
2
Display the screen.
1
Press the
[Status/System
2
Press the [▲] or [▼] key to select [Admin/Accounting], and press the [OK] key.
Status/Sys. Menu
Admin/Accounting
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page
The factory default login user name and login password are set as shown below.
Login User Name
*1
Admin
*1 Upper case and lower case letters are distinguished (case sensitive).
3
Press the [▲] or [▼] key to select [Job Account. Set.], and press the [OK] key.
4
Press the [▲] or [▼] key to select [Account. List], and press the [OK] key.
Change account information.
1
Press the [▲] or [▼] key to select the account you want to change and press the [OK] key.
Account. List
01
2
Press the [▲] or [▼] key to select [Detail/Edit], and press the [OK] key.
3
Refer to step 2 of
Adding an Account on page 8-4
on page 8-6
to change account information.
Menu/Counter] key.
2-20.
Admin
and
8-7
Login Password
*1
Restricting the Use of the Machine