Olivetti d-COPIA 1801 MF Operation Manual page 114

Operation on the Machine > Scanning
Use Your Desired Destination
If there are settings that you change from "My Documents" in the computer (Host PC) connected to the machine
via USB, set the destination by using Client Tool. You can simply select the destination number as needed to recall
those functions.
Ten destinations including the default [Local PC] can be registered. Refer to
Tool) on page 7-16.
1
2
3
4
5
Start Client Tool on the Host PC.
Refer to Accessing Client Tool on page
Press the [Scan] key on the machine.
Place the originals.
Loading Originals (page 5-2)
Select the destination number.
Press the [▲] or [▼] key to select a destination number (01 to 10) to recall, and press the [OK]
key.
Ready to scan.
Local PC
NOTE
The name set by using Client Tool appears. [----------------] appears for the
destination for which no name is set.
Press the [Start] key.
Scanning starts.
When the scan ends, the folder in which an image is saved opens on the Host PC.
Default Settings on the PC (Client
2-18.
1 2
5-33