Olivetti d-COPIA 1801 MF Operation Manual page 107

Operation on the Machine > Copying
Confirming the Registered Program
The settings of the registered program can be confirmed by recalling the program. Refer to
5-26.
Recalling Program
Use the procedure below to recall a registered program.
1
2
4
Enter a program name using the numeric keys and press the [OK] key.
Program Name
The program is registered.
Character Entry Method (page 10-4)
NOTE
• Up to 32 characters can be entered.
• If the program number is already used in any of the existing programs, the change
confirmation screen appears. Press the [▲] or [▼] key to select [Yes] or [No], and
press the [OK] key.
• The settings can be confirmed by recalling the program. Refer to
page 5-26.
Recall the program.
1
Press the [Program] key.
2
Press the [▲] or [▼] key to select a program number (01 to 04) to recall, and press the
[OK] key.
Select program
Program 01
3
Press the [▲] or [▼] key to select [Recall], and press the [OK] key.
Program 01
Recall
Execute the program.
Place the originals and press the [Start] key.
1
1
1
5-26
2
Recalling Program on
Recalling Program on page
2
2