Olivetti d-COPIA 1801 MF Operation Manual page 104

Operation on the Machine > Copying
Border Erase
Erases the black border that forms around the image. The following modes are available.
Border Erase Sheet
Original
Border Erase Book
Original
NOTE
The default setting for border erase width can be changed. For details, refer to
Item
Off
Sheet
Book
Advanced Erase
Sheet Border
Back Page
Book Border
Gutter
Back Page
*1 The input units can be changed in System Menu. For details, refer to
*2 The optional duplex unit is required.
Erases black borders around the single sheet original.
Copy
Erases black borders around the edges and in the middle of the original such
as a thick book. You can specify the widths individually to erase the borders
around the edges and in the center of the book.
Copy
Value
―
―
―
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
*2
Same as FrontPage, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
*2
Same as FrontPage, Do Not
Erase
Border Erase on page
Disables the function.
Copies the original with the default setting. For the
default settings, refer to
13.
Changes the settings.
Set the border erase width.
Use the numeric keys or press the [▲] or [▼] key to
enter the border erase width, and press the [OK]
key.
For 2-sided originals, select [Same as FrontPage]
or [Do Not Erase], and press the [OK] key.
Set the border erase width.
Use the numeric keys or press the [▲] or [▼] key to
enter the border erase width, and press the [OK]
key.
For 2-sided originals, select [Same as FrontPage]
or [Do Not Erase], and press the [OK] key.
Measurement on page
5-23
7-13.
Description
Function Default on page 7-
*1
*1
7-11.