Olivetti d-COPIA 1801 MF Operation Manual page 100

Operation on the Machine > Copying
Collate/Offset
Offsets the output by page or set.
Value
―
Off
Collate Only
Offset Each Page
Offset Each Set
Original Size
Specify the original size to be scanned.
Auto
A3, A4-R, A4, A5-R, A5, A6-R, B4, B5-R, B5, B6-R, B6, Folio,
216 × 340 mm, Ledger, Letter-R, Letter, Legal, Statement-R,
Statement, 11 × 15", Oficio II, 8K, 16K-R, 16K, Hagaki,
*1
Oufukuhagaki, Custom
*1 For instructions on how to specify the custom original sizes, refer to
NOTE
Be sure to always specify the original size when using custom size originals.
Image
Item
Disables the function.
Scans multiple originals and delivers complete sets of copies
as required according to page number.
When offsetting is used, printed copies are produced after
rotating each page by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and
16K.
When offsetting is used, printed copies are produced after
rotating each set by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected paper
tray must be loaded in a different orientation in a different
paper tray.
The paper sizes supported in Offset are A4, B5, Letter and
16K.
Have the size of original detected automatically.
Select from standard sizes.
Custom Orig.Size on page
5-19
Description
Description
7-7.