Olivetti d-COPIA 1801 MF Operation Manual page 112

Operation on the Machine > Scanning
Scan the Image by Selecting the Destination (Quick Scan)
Select the scan method and destination for each job by using Client Tool.
Perform a scan by operating the computer (Host PC) connected to the machine via USB. If the shared folder in the
computer (Client PC) on the network is selected for the destination, an image can be saved on the computer that is not
connected to the machine via USB.
Quick Scan, the following 3 types of scan are possible.
• Scan to PDF: Saves the scanned image in PDF format.
• Scan to Email: Attaches the scanned image to a new E-mail message.
• Scan to Folder: Saves the scanned image to a specified folder.
Scanning using TWAIN
Make the image processing application read the scanned image. This function is available only for the computer
connected via USB. (Refer to
1
Perform a scan by using Client Tool.
(Refer to Scan the Image by Selecting
the Destination (Quick Scan) on
page 5-34)
Host PC
USB
Client Tool
Scanning using TWAIN on page
Network
Network
5-35.)
5-31
2
An image is saved in the
folder set by Client Tool.
Client PC