Entrust nShield 5c Installation Manual page 72

5. If you are not planning to re-install the product, delete the configuration file
/etc/nfast.conf
Do not delete the configuration file if you are planning to re-install

the product.
6. Unless needed for a subsequent installation, remove the user
the user ncsnmpd:
a. userdel -r nfast
b. groupdel nfast
If required, you can safely remove the module after shutting down all connected
hardware.
nShield® 5c Installation Guide
if it exists.
userdel -r ncsnmpd
and
groupdel ncsnmpd
and
will remove the users.
will remove the groups.
nfast
and, if it exists,
72 of 77