Entrust nShield 5c Installation Manual page 36

Bond interface config
Update parameter
mode: 802.3ad
BACK NEXT
3. Set the mode field to the required option, either
4. To accept, press the right-hand navigation button.
The following screen displays:
Bond interface config
Update parameter
miimon: 100
BACK NEXT
5. Set the miimon
field to the required value, the range is
miimon
Setting the
functioning correctly in
6. To accept, press the right-hand navigation button.
The following screen displays:
Bond interface config
Update parameter
lacp_rate: slow
only valid for
802.3ad (LACP) mode
BACK NEXT
7. Set the lacp_rate
This parameter is only valid for 802.3ad mode. This setting is ignored in other modes.
slow request LACPDUs to be transmitted every 30 seconds
fast request LACPDUs to be transmitted every 1 second
8. To accept, press the right-hand navigation button.
The following screen displays:
nShield® 5c Installation Guide
0
value to disables it. This can prevent the bonding resilience from
active-backup
field to the required option, either
802.3ad or active-backup.
0
-
mode.
slow
10000
milliseconds.
or fast.
36 of 77