Basic Configuration Of The Client To Use The Nshield Nshield 5C - Entrust nShield 5c Installation Manual

9.3. Basic configuration of the client to use the nShield
nShield 5c
9.3.1. Client configuration utilities
Entrust provides the following utilities for client configuration:
Utility
nethsmenroll
config-serverstartup
9.3.1.1. nethsmenroll
nethsmenroll
The command-line utility edits the client hardserver's configuration file to
add the specified nShield nShield 5c. If the nShield nShield 5c's
nethsmenroll
specified,
they are, and requests confirmation.
Usage:
nethsmenroll [Options] --privileged <hsm-ip> <hsm-esn> <hsm-kneti-hash>
Options:
-m|--module=MODULE
-p|--privileged
nShield® 5c Installation Guide
Description
Used to configure the client to communicate with
the nShield nShield 5c.
Used to configure the hardserver of the client to
enable TCP sockets.
attempts to contact the nShield nShield 5c to determine what
Specifies the local module number that should be
used (default is
hardserver).
Makes the hardserver request a privileged
connection to the nShield nShield 5c (default
unprivileged).
ESN
and
0
for dynamic configuration by
HKNETI
are not
49 of 77