Entrust nShield 5c Installation Manual page 37

Bond interface config
Update parameter
xmit hash policy:
layer2
only valid for
802.3ad (LACP) mode
BACK NEXT
9. Set the xmit hash policy
This parameter is only valid for 802.3ad mode. This setting is ignored in other modes.
Options:
◦ layer2
◦ encap2+3
◦ layer2+3.
For more information, see
bonding.txt
10. To accept, press the right-hand navigation button.
The following screen displays:
Bond interface config
Update parameter
primary device: eth0
only valid for
active-backup mode
BACK NEXT
11. Set the primary device
This parameter is only valid for
modes.
12. To accept, press the right-hand navigation button.
The following screen displays:
Bond interface config
Update parameter
resend igmp: 1
only valid for
active-backup mode
BACK NEXT
nShield® 5c Installation Guide
field to the required option.
https://www.kernel.org/doc/Documentation/networking/
field to the required option, either
active backup
eth0 or eth1.
mode. This setting is ignored in other
37 of 77