Connecting External Fuel Supply - Miller Bobcat 200 Air Pak Owner's Manual

5-8. Connecting External Fuel Supply

OM-283762 Page 28
.
A complete Parts List is available at www.MillerWelds.com
Plug fuel line from tank.
!
Route all hoses away from
hot, sharp or moving parts.
Check all connections and
hoses for damage, leaks, and
wear.
Follow all applicable regulations.
Fuel pickup hose should be 1/4 in.
(6.35 mm) ID minimum.
Connect hoses and secure hose
clamps.
Plug fuel line from tank. Fill tank
halfway with 50/50 antifreeze/water
mixture.
NOTICE − Do not fill tank more than
halfway. Overfilling will cause an-
tifreeze mixture to interfere with fuel
tank vent.
Connect fuel source to fuel filter.
Tools Needed:
284488