Introduction; Applicable Safety Standards; Worker Classifications - Guardian Fall Protection 00484 Instruction Manual

Introduction

Thank you for purchasing a Guardian Fall
Protection Bull Ring Anchor. This manual
must be read and understood in its entirety,
and used as part of an employee training
program as required by OSHA or any
applicable state agency.
This and any other included instructions
must be made available to the user of the
equipment. The user must understand how
to safely and effectively use the Bull Ring
Anchor, and all fall safety equipment used
in combination with the Bull Ring Anchor.

Applicable Safety Standards

When used according to instruction specifications, this product meets or exceeds all applicable OSHA 1926
Subpart M, OSHA 1910, ANSI Z359.18-2017, and ANSI A10.32-2012 standards for fall protection. This product
has been tested in compliance with the requirements of ANSI/ASSE Z359.7. Note that if installing with nails
this product is compliant with OSHA only. Testing only covers hardware and does not extend to the anchorage
or substrate to which this product is attached. Applicable standards and regulations depend on the type of
work being done, and also might include state-specific regulations. Consult regulatory agencies for more
information on personal fall arrest systems and associated components.
PRODUCT COMPLIANCE
Nail Installations
Screw Installations

Worker Classifications

! CAUTION
Qualified Person: A person with an accredited degree or certification, and with extensive experience or
sufficient professional standing, who is considered proficient in planning and reviewing the conformity of fall
protection and rescue systems.
Competent Person: A highly trained and experienced person who is ASSIGNED BY THE EMPLOYER to be
responsible for all elements of a fall safety program, including, but not limited to, its regulation, management,
and application. A person who is proficient in identifying existing and predictable fall hazards, and who has
the authority to stop work in order to eliminate hazards.
Authorized Person: A person who is assigned by their employer to work around or be subject to potential or
existing fall hazards.
It is the responsibility of a Qualified or Competent person to supervise the job site and ensure all
applicable safety regulations are complied with.
1
Date of First Use:
Serial #:
Trainer:
User:
OSHA 1910 & OSHA 1926 Subpart M
YES
YES
Understand the following definitions of those who
work near or who may be exposed to fall hazards.
User Information
ANSI Z359.18 & ANSI A10.32
NO
YES