Connecting A 600-Series Pump - Waters 2475 Operator's Manual

Connecting a chart recorder to the detector
+ –
Chart recorder
terminals
Chart marks
You can also generate a chart mark from the detector's front panel whenever
you perform these actions:
• Press Chart Mark on the detector's keypad.
• You program a timed event to generate a chart mark.
• A chart mark signal is generated at the chart mark inputs on the analog
connector.

Connecting a 600-series pump

To connect a 600-series pump:
1. Place the detector on a level surface.
2. Make the plumbing connections described on
2475 detector
B (inputs and outputs)
Red
Black
+
1 Detector out 1
−
2 Detector out 1
3 Ground
+
4 Detector out 2
−
5 Detector out 2
+
6 Switch 1
−
7 Switch 1
8 Ground
+
9 Switch 2
−
10 Switch 2
page 2-3.
Connecting other devices 2-29