B External Connections
This appendix describes the mass spectrometer's external connections.
Warning:
and the supplied harness to lift it.
Notice:
• Contact Waters Technical Service before moving the instrument.
• If you must transport the instrument, or remove it from service, contact Waters
Technical Service for recommended cleaning, flushing, and packaging procedures.
B.1 External wiring, vacuum, and gas connections
Rear panel connections appear in the figure below. The connectors and controls not identified are
for use by Waters engineers only.
Figure B–1: Rear panel connections
Nano camera connection
Event input and outputs
The mass spectrometer is heavy. To avoid injury, use suitable machinery
To avoid damaging the mass spectrometer, observe the following precautions:
January 10, 2022, 715006200 Ver. 01 (previously released as Rev. A)
Page 153