B External Connections - Waters Xevo TQ-S micro Overview And Maintenance Manual

B
External Connections
Warning:
objects, use suitable machinery and the supplied harness to lift the mass
spectrometer.
Notice:
precautions:
• Contact Waters Technical Service before moving it.
• If you must transport the instrument, or remove it from service, contact
See
Contents:
Topic
External wiring and vacuum connections..................................................... 232
Connecting the oil-filled roughing pump ..................................................... 233
Connecting the Edwards oil-free roughing pump......................................... 238
Connecting to the nitrogen gas supply ......................................................... 242
Connecting to the collision cell gas supply .................................................. 243
Connecting the nitrogen exhaust line ........................................................... 244
Connecting the liquid waste line .................................................................. 246
Connecting the workstation .......................................................................... 249
Connecting Ethernet cables .......................................................................... 250
I/O signal connectors .................................................................................... 251
Connecting to the power supply ................................................................... 255
To avoid skeletal or muscle injury associated with lifting heavy
To avoid damaging the mass spectrometer, observe the following
Waters Technical Service for recommended cleaning, flushing, and
packaging procedures.
page 95 for safety and handling considerations.
January 11, 2016, 715004599 Rev. B
Page
231