2. Installation
This chapter introduces how CMC-EC01 is connected with C2000 series, and how it is connected to
the network.
2.1
Mounting Position of Option Card
Before mounting the option card, remove the digital keypad and top cover. Be sure to follow the steps
below to prevent damage to the drive during installation.
Frame A–C
Frame D0
Screw torque: 8–10 kg-cm / (6.9–8.7 lb-in.) / (0.8–1.0 Nm)
Frame D
Screw torque: 8–10 kg-cm / (6.9–8.7 lb-in.) / (0.8–1.0 Nm)
CMC-EC01 Operation Manual
10
Screw torque: 8–10 kg-cm / (6.9–8.7 lb-in.) / (0.8–1.0 Nm)
EtherCAT Option Card CMC-EC01