Delta Plc - Ah10Emc Operation Example (Ecat Builder) - Delta CMC-EC01 Operation Manual

7.2 Delta PLC – AH10EMC Operation Example (ECAT Builder)
Device
Software
1. Connect CMC-EC01 to the AH10EMC EtherCAT port, and connect the AH10EMC to the computer
through the Ethernet port.
2. Open the COMMGR software, click New Driver menu at the top, select the connection setup type
as Ethernet in the Ethernet tab, select the correct Ethernet Card, and then click Search to verify
that the AH10EMC appears in the list. Then, click the Save Driver menu for ISPSoft connection.
CMC-EC01 Operation Manual
50
AH10EMC
Computer
Drive: CH2000
Communication Card: CMC-EC01
COMMGR
ISPSoft
ECAT Builder
EtherCAT Option Card CMC-EC01
IP: 192.168.1.1
Network Card IP: 192.168.1.123
V1.11 or above
V3.10 or above
V1.07 or above