Mounting And Detatching Option Card; Moutning The Option Card - Delta CMC-EC01 Operation Manual

EtherCAT Option Card CMC-EC01
2.2

Mounting and Detatching Option Card

2.2.1

Moutning the Option Card

As the figure on the left shows, place the insulation
spacer into the positioning pin first. Next, aim the
two holes on PCB at the positioning pins, and then
press downward to have the two clips engage the PCB.
Mo d e l Na me
CMC CO P 0 1
CMC E IP 0 1
CMC DN0 1
CMC- P D0 1
CMC- P N0 1
In su l a ti o n sp a ce r
CMC-EC01 Operation Manual 13