EtherCAT Option Card CMC-EC01
7. Operation Example
7.1
Delta PLC – AX-8 Operation Example (Designer-AX (Codesys base))
Device
Software
1. Connect CMC-EC01 to AX-8 through the EtherCAT port, and connect AX-8 to the computer
through the Ethernet port (GLAN1).
2. Open DIADesigner-AX software, and then click New Project
AX-8
Computer
Drive: C2000 Plus
Communication Card: CMC-EC01
DIADesigner-AX
GLAN1 IP: 192.168.0.10
Network Card IP: 192.168.0.123
V1.1.0 or above
CMC-EC01 Operation Manual 41