Assembly Replacement Sequence - Keysight Technologies N5224/5A Service Manual

Replaceable Parts

Assembly Replacement Sequence

Assembly Replacement Sequence
The following steps describe how to replace an assembly in the network
analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty
assembly.
Step 2. Order a replacement assembly. Refer to this chapter.
Step 3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to
Step 4. Perform the necessary adjustments. Refer to
Adjustments."
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
Step 6. Keysight personnel: see
stickers should be placed on the PNA.
Keysight N5224A/25A Service Guide
Chapter 7, "Repair and Replacement Procedures."
Figure 1-1 on page 6
Chapter 4, "Troubleshooting."
Chapter 3, "Tests and
Chapter 3, "Tests and
to review where the calibration
Follow up
6-3