Keysight Technologies N5224/5A Service Manual page 59

Tests and Adjustments
System Verification
Figure 3-13
selected in the Printer Output area of the System Verification dialog box. The
printed graphical results show the following:
— the name of the device measured
— the serial number of the device
— the parameters measured
— Results of the measurements. Labeled as A in
— Data measured at the factory from the verification kit. Labeled as B in
3-13.
— Upper and lower limit points as defined by the total system uncertainty
system. Labeled as C in
Keysight N5224A/25A Service Guide
shows an example of typical verification results with Print Graphs
Figure 3-13.
Figure 3-13.
3-29
Figure