2-Port Configuration, Option 210 - Keysight Technologies N5224/5A Service Manual

Replaceable Parts
Replaceable Parts Listings

2-Port Configuration, Option 210

Bottom Assemblies, 2-Port, Option 210
Reference
Part Number
Designator
A23 N5245-60157
Was N5247-60001
A24
N5240-60062
Was N5240-60045
A25 5087-7765
A27 5087-7323
5087-6323
A29 5087-7760
A32
A33 5087-7793
A36
A64 08490-60040
A67
N5240-60058

A68 08490-60039
a. Part numbers in italic typeface are for rebuilt exchange assemblies. Refer to
page 6-4.
b. All new units built after August 2009, no longer use the N5242-60031 cable that was attached to connector
P1001 and Source 2. As a result of this change, the IF multiplexer boards have had their P1001 connectors
removed. If your instrument contains a N5242-60031 cable, remove it from your instrument.
6-36
Qty Description
a
1 Test set motherboard
1 IF multiplexer board
b
1 LO Multiplier/amplifier 26.5 (HMA26.5)
1 Mixer brick
2 Test port 1 receiver coupler
Test port 2 receiver coupler
2 Test port 1 coupler
Test port 2 coupler
2 Test port 1 6-dB attenuator
Test port 2 6-dB attenuator
2 Front panel LED board
1 3 dB attenuator (pad) connected to mixer brick (R1)
"Rebuilt-Exchange Assemblies" on
Keysight N5224A/25A Service Guide