Bottom Hardware And Miscellaneous Parts - Keysight Technologies N5224/5A Service Manual

Replaceable Parts
Replaceable Parts Listings

Bottom Hardware and Miscellaneous Parts

Reference Part Number
Designator
0515-1227

0515-2994

N5245-00017

0515-0430

0515-0372

0515-2007

08490-60039

N5245-20002

0515-0374

0515-0667

N5235-00018
11
N5245-20125
12
N5245-00023
N5224-00002
13
0515-0664
14
N5225-00001
15
0515-1602
16
N5245-00024
17
N5245-00022
18
N5245-00015
19
Keysight N5224A/25A Service Guide
Qty Description
-- Machine screw, M3.0 x 6, flat head (To attach test set front sub panel.)
-- Machine screw, M3.0 x 0.5, pan head (8 to attach A42–A45 bias tees to their
brackets.)
4 Bracket (For A29–A32 test port couplers.)
-- Machine screw M3.0 x 6 pan head (To attach: A47 & A48 receiver attenuator
brackets to test set deck, source attenuator brackets to test set deck.)
-- Machine screw, M3.0 x 8, pan head (To attach: A23 test set motherboard to test set
deck and stabilizer bracket, stabilizer bracket to A24 IF mux board, A38–A41 source
attenuators to their brackets, A46–A49 receiver attenuators to their brackets, A46 &
A49 receiver attenuator brackets to test set deck, test set deck to chassis, shields to
mixer bricks, A25 HMA26.5 to inner bracket, A37 reference mixer switch to its
bracket, and coupler plate assy to test set deck front, bias tee brackets to the
chassis.)
-- Machine screw M3.0 x 14 (To attach splitter to top of mixer brick mounting block.)
1 A69 3 dB pad (For A28 mixer brick R4.)
1 Mounting block (For A27 and A28 mixer bricks.)
-- Machine screw M3.0 x 10 pan head (To attach mixer brick mounting block and
receiver coupler mounting brackets; reference mixer switch to test set deck.).
-- Machine screw M3.0 x 20 pan head (To attach mixer bricks to mounting block.)
1 Bracket, ribbon cable clamp
8 Gap pad (Between each mixer brick and its shield.)
2 Mixer brick shield
1 Test set deck
-- Machine screw (To attach bracket (for semi rigid cables) to test set deck.)
2 Bracket (For A46 port 1 and A49 port 2 receiver attenuators.)
-- Machine screw, M2.0 x 6, flat head (To attach receiver couplers to brackets.)
1 Bracket (For A37 reference mixer switch.)
2 Bracket (For semi rigid cables; only 1 used for 2-port, both used for 4-port.)
6 Bracket (For A47 port 3 & A48 port 4 rcvr attenuators & all src attenuators.)
6-105