Table of Contents
Advertisement
Repair and Replacement Procedures
Removing and Replacing the A38–A41 Source Attenuators and the A46–A49 Receiver
Attenuators
Replacement Procedure
1. Reverse the order of the removal procedure.
Torque all cable connections to 10 in-lbs.
2. Perform the post-repair adjustments, verifications, and performance tests
that pertain to this removal procedure. Refer to
7-50
Table 7-2 on page
Keysight N5224A/25A Service Guide
7-64.
Advertisement
Table of Contents
Troubleshooting
