Rear Panel Connectors; Figure 2- -5: Rear Panel Connectors - Tektronix DTG5078 Service Manual

Rear Panel Connectors

CD-ROM drive
COM
Mouse
DTG5078 & DTG5274 Data Timing Generator Service Manual
Figure 2- -5 shows the locations of the data timing generator rear panel connec-
tors. Also refer to Figure 2- -6 on page 2- -25 for peripheral connectors and ports.
Figure 2- - 5: Rear panel connectors
CAUTION. To prevent damage to your data timing generator, do not apply a
voltage outside the specified input voltage range.
Do not apply a voltage to the output connector.
The CD-ROM drive is used to reinstall the DTG5000 product software or to
rebuild the operating system.
COM port.
Connect a PS/2 mouse. Any USB mouse must be connected to the USB port.
Operating Basics
Figure 2--6
on page 2--25
2- - 21