Manual Conventions; Finding Other Information - Tektronix DTG5078 Service Manual

Preface

Manual Conventions

Modules
Safety

Finding Other Information

Document name
DTG5000 Series Online Help
DTG5000 Series User Manual, volume 1
DTG5000 Series User Manual, volume 2
DTG5000 Series Programmer Manual
xvi
This manual uses certain conventions that you should become familiar with.
Some sections of the manual contain procedures for you to perform. To keep
those instructions clear and consistent, this manual uses the following conven-
tions:
H Name of front panel controls and menus appears in the same case (initial
capitals, all uppercase, and so on) in the manual as is used on the data timing
generator front- -panel and menus. Front - -panel names are all upper case
letters (for example, MENU, SELECT, PULSE GEN, and so on).
H Instruction steps are numbered unless there is only one step.
Throughout this manual, any replaceable component, assembly, or part of the
data timing generator is referred to generically as a module. In general, a module
is an assembly (like a circuit board), rather than a component (like a resistor or
an integrated circuit). Sometimes a single component is a module; for example,
the chassis of the data timing generator is a module.
Symbols and terms related to safety appear in the Safety Summary near the
beginning of this manual.
This manual mainly focuses on the performance verification, troubleshooting and
maintenance of the data timing generator. See the following list for other
documents supporting the data timing generator operation.
Description
An online help system, integrated with the User Interface application that ships with this
product. The help is preinstalled in the instrument.
A quick reference to major features of the instrument and how they operate. It also
provides several tutorials to familiarize the user with basic instrument features.
A comprehensive usage information on how to operate the instrument including the
descriptions of functions and menu operations.
Provides complete information on programming commands and remote control of the
instrument.
DTG5078 & DTG5274 Data Timing Generator Service Manual