Thermo Scientific 3403 Manual page 39

Thermo Scientific
'B' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE
Description: This command displays the hour count of the next sched-
uled battery check.
'C' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE
Description: This command displays the eight hexadecimal value of the
checksum (does not actually calculate the checksum, it just reads it from
non-volatile memory.
'e' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE
Description: This command dumps the defined ranges of internal and
external RAM that is stored in the non-volatile memory (the same range
that is dumped every 24 hours) to the non-volatile memory.
'E' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE
Description: This command will output a stream composed of the
entire non-volatile memory contents in the following fashion:
"9356 (0-255 decimal) (0x00-0xFF hexadecimal) (value in hexadecimal)"
'F' COMMAND
Repeat: YES
Frequency: Every two seconds
Compile Dependencies: NONE
Description: This command dumps the variable FlagBank which is spe-
cific to each version of code. Requires understanding of memory map to
be useful.
Section 8
Appendices
Midi 40 CO2 Incubator 8-7