Thermo Scientific 3403 Manual page 38

Section 8
Appendices
8-6 Midi 40 CO2 Incubator
The following list comprises all available IntrLogic Incubator telemetry
command streams:
'?' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE...different views though
Description: This command simply outputs a list of available com-
mands. The list will vary depending on what type of device and its
options.
'#' COMMAND
Repeat: NO
Frequency: N/A
Compile Dependencies: NONE
Description: This command erases all non-volatile memory (9356 chip)
on the IntrLogic CPU board.
'0', '1', '2', '3', '4', '5', '6', '7' COMMANDS
Repeat: YES
Frequency: Every two seconds
Compile Dependencies: NONE
Description: This command outputs the voltage of the ADC channel
specified by the command in uV.
'A' COMMAND
Repeat: YES
Frequency: Every two seconds
Compile Dependencies: Available in all code...effected by Incubator
and O2Control
Description: This command lists the actuals.
Param 1: Cabinet Probe including TempOffset (divide by 10 to convert
to °C)
Param 2: Incubator only - water RTD (divide by 10 to convert to °C)
Param 3: Incubator only - CO2 concentration (divide by 10 to convert
to %)
Param 4: O2 Control only...O2 concentration (divide by 10 to
convert to %)
Param 5: Relative humidity (divide by 10 to convert to %)
Thermo Scientific