Dual band heavy duty submersible transceiver (112 pages)
Summary of Contents for Yaesu ADMS-16
Page 1
ADMS-16 Instruction Manual The ADMS-16 software provides convenient editing of the FTM-500DR/DE memory channel frequencies, channel information and alpha tags, using a personal computer. Also, the trans- ceiver parameters and the setup menu items may be edited and configured easily from the computer keyboard.
Necessary PC peripheral interfaces ....4 • Sort ............... 21 Trademarks ............4 Communications (Data communication The flow of a setup of ADMS-16 ......5 with the FTM-500DR/DE) ........22 Setup of the ADMS-16 ......6 Settings .............. 22 Preparation ............6 •...
Page 3
• TX DG-ID ............28 • Tx Power ............29 • AUTO STEP ..........29 • Step ............... 29 • Narrow ............29 • Clock Shift ............. 29 • Comment ............29 HOME A / HOME B ..........30 About the setting items of HOME A / HOME B channel frequency ..
• Do not resell the software or manuals. • All responsibility for the use of this software lies with the customer. Yaesu cannot be held re- sponsible in any way for any damages or losses, which may be incurred by the customer as a result of using this software.
System Requirements Supported Operating Systems Microsoft Windows ® ® Microsoft Windows ® ® Microsoft Windows ® ® The performance of the CPU must satisfy the operating system requirements. RAM (System Memory) The capacity of the RAM (system memory) must be more than sufficient to satisfy the operating system requirements.
The flow of a setup of ADMS-16 The procedure when using ADMS-16 for the first time is as follows: ADMS-16 Programming Software Installation (6 page) ↓ SCU-58/SCU-40 USB Driver Software Installation (8 page) ↓ Connect the FTM-500DR/DE and the PC (8 page) ↓...
Preparation Download the ADMS-16 software from the Yaesu Website for details (http://www.yaesu.com/). Download the ADMS-16 Programming Software to the same folder that contains unzip files. ADMS-16 Programming Software Installation 1. Start up the computer as an “Administrator” user.
6. When the installation is finished, the dialog box shown right will open. Click the [Finish] button, to complete the installation of the software. Uninstalling the ADMS-16 The procedure to manually uninstall ADMS-16 on a Windows 11 computer is shown below for the purpose ® of explanation.
Before using the SCU-56/SCU-20 PC connection cable, installation of the driver software for the SCU-58/ SCU-40 is required. Download the driver software for the SCU-58/SCU-40 in advance. Download the designated driver software from the Yaesu website (https://www.yaesu.com/). Read the installation manual thoroughly and install the driver. The SCU-56/SCU-20 is included in the optional SCU- 58/SCU-40 WIRES X Connection Cable Kit.
Click “Exit” in the “File” menu to close the ADMS-16. Be sure to read the transceiver data information before using ADMS-16 It is necessary to read the data information from the transceiver first. If the data is not read, it will not be possible to load the saved file or transfer the data to the transceiver.
Display examples First Screen This is the first screen to be displayed when starting the ADMS-16 software. Menu Bar Click the left mouse button on each Menu in the Menu bar to settings the import/export the setting data file, get data form FTM-500DR/DE and send data to FTM-500DR/DE.
TAB Menu Bar Click the left mouse button on each TAB in the title bar (Memories, SKIP, PMS, VFO, etc) to display the frequency list of the desired memory channels, VFO and other preset transceiver settings. For more details, see “Setting the Template Items”. Set mode screen Basic setting items which are not related to memory channels can be configured from “Set Mode”.
Communications (Data communication with the FTM-500DR/DE) Get Data from SD card This command imports the settings data from the microSD memory card to the ADMS-16 PC programmer, and creates a new data file. 1. Insert the microSD memory card with the saved data from FTM-500DR/DE to the computer.
Send Data to SD card Memories and settings from the ADMS-16 PC programmer may be transferred to the microSD memory card. Data cannot be sent to the microSD memory card until the information is read from the FTM-500DR/DE to the ADMS-16 PC programmer. See “Be sure to read the transceiver data infor- mation before using ADMS-16”...
Get Data from FTM-500DR/DE This command transfers the settings data of the FTM-500DR/DE to the ADMS-16 PC programmer. To communicate with the FTM-500DR/DE and create a new data file. Click the [Get Data from FTM-500D] parameter in the “Communications” menu. The “Get Data From FTM-500D” window will open. Connect the PC connection cableSCU-56 or SCU-20 between the FTM-500DR/DE and the computer.
This menu item is grayed out and cannot be operated until the information is read from the FTM- 500DR/DE into the ADMS-16 PC programmer. See “Be sure to read the transceiver data informa- tion before using ADMS-16” (Page 9) for more information.
This menu item is grayed out and cannot be operated until the information is read from the FTM- 500DR/DE into the ADMS-16 PC programmer. See “Be sure to read the transceiver data informa- tion before using ADMS-16” (Page 9) for more information.
• Import with FT1D/FT2D format To create a data file for the import of data, save the spreadsheet in the “CSV” comma separated file format (FT2D or FT1XD/D). A spreadsheet may be easily created by exporting the template data in the “CSV” format using the ADMS-8 or ADMS-6 “Export”...
• Exit To exit the ADMS-16 PC programmer, click the [Exit] parameter in the [File] menu to close the ADMS-16 software. If the following pop-up screen appears to confirm saving, follow the on-screen instruction to select the desired button and close the ADMS-16 software.
Edit Click the row to edit, then perform the following each operations. Part of setting items of each row cannot be cut, copy, and paste is not possible. • Undo To undo the edited data, click the [Undo] parameter in the “Edit” menu. •...
• Find Next Click the [Find Next] parameter in the “Edit” menu to move to the next candidate character string. • Go to Channel Move the cursor to the desired channel, click the [Goto Channel] parameter in the “Edit” menu to open the screen where you can specify the channel you want to move to.
• Add Frequency Range New channels may be created in designated frequency steps from the starting frequency by clicking the left mouse button on the [Add Frequency Range] parameter in the “Edit” menu. The “Add Frequency Range” window will open. A specified number of memory channels may be created, beginning from the starting frequency in the specified frequency steps.
From the set mode menu, you can customize the various functions of the FTM-500DR/DE according to your preferences. The ADMS-16 software displays the set mode menu in an easy-to-understand manner where you can change and save the setting values. Click the [Settings] parameter in the “Settings” menu to open the “Set Mode” window.
A check mark appears next to the “Status Bar” parameter when the Status Bar is displayed. Window This menu sets the operating window parameters of the ADMS-16 PC programmer. • Click the [Tile (up and down)] parameter in the “Window” menu to display multiple template files by dividing the window into two lists (upper and lower parts).
Setting the Template Items Memory Use this page to edit the Memory channels data, Skip Memory channels, or PMS (Programmable Memory Scan) memory channels. Memories Enter and edit the frequencies you normally use to the memory channels. Up to 999 channels can be registered.
About the setting items of each memory channels • Receive Frequency/ Transmit Frequency Enter the desired receive/transmit frequency. When the frequency entry is complete, use the → key to move the cursor to the right and subsequently configure the additional detail settings for the channel. To enter the transmit frequency for the next channel, press the ENTER or ↓...
• RX DG-ID Select the receiving DG-ID number. • TX DG-ID Select the transmitting DG-ID number • Tx Power This item selects the TX Power. • Step Sets the channel step for receiving channels. • Narrow By ticking the checkbox of this item, switches to the Narrow FM mode. •...
• Receive Frequency Enter the VFO frequencies for each band. The FTM-500DR/DE default Frequencies are pre-entered into the ADMS-16 standard template. A frequency that is out of the transceiver’s range cannot be entered. When the error pop-up window is opened, enter the correct frequency.
• Offset Direction Set the frequency shift direction. OFF: The transmit frequency is not shifted. -RPT: The transmit frequency is shifted to the minus offset. +RPT: The transmit frequency is shifted to the plus offset. • AUTO MODE When tick the check box of AUTO MODE, the receive mode (FM mode or AM mode) is automatically se- lected.
• AUTO STEP By ticking the checkbox of this item, the frequency step is set to “AUTO” automatically provides a suitable frequency step (frequency variation by rotating the DIAL knob) according to the frequency band. By Turn- ing off the checkbox, the step setting become selectable. •...
• Receive Frequency / Transmit Frequency Enter any desired changes into Home Channel frequency. The FTM-500DR/DE default Frequencies are pre-entered into the ADMS-16 standard template. A frequency that is out of the transceiver’s range cannot be entered. When the error pop-up window is opened, enter the correct frequency.
• Operating Mode Select the operating mode for receive channel. The selected frequency band is set to FM mode. The selected frequency band is set to AM mode. • DIG/ANALOG The AMS, V/D mode (DN), the Voice FR mode (VW) and the ANALOG mode (FM/AM mode) are select- able.
• Clock Shift When an internal spurious signal occurs due to the microcomputer clock, turn this setting on (tick the checkbox). This may improve the situation. Usually, this item is set to “OFF” (un-tick the checkbox). • Comment Comments may be added to the edited HOME channels. Up to 255 letters can be used. This function is useful in organizing the HOME channels by, for example, applying a category name to each channel.
Troubleshooting • The FTM-500DR/DE cannot receive or transmit data to the computer • The Data transfer does not start • Verify that the programming cable is correctly connected to the FTM-500DR/DE data port and to the Computer. Connect correctly. • Is the computer COM Port setting correct? Set the COM Port correctly.
Page 35
Copyright 2023 YAESU MUSEN CO., LTD. All rights reserved. No portion of this manual may be reproduced without the permission of YAESU MUSEN CO., LTD. YAESU MUSEN CO., LTD. Omori Bellport Building D-3F 6-26-3 Minami-Oi, Shinagawa-ku, Tokyo, 140-0013, Japan YAESU USA 6125 Phyllis Drive, Cypress, CA 90630, U.S.A.
Need help?
Do you have a question about the ADMS-16 and is the answer not in the manual?
Questions and answers